Видео

Just fill the bottle with pure product and turn the mix knob on top to get the desired thickness of foam thats what its there for, ots not rocket science?

For best results work in a sheltered area,damper the pad and don't use too much polish,plus you must let it cure till the next day before washing,it's a great product,good luck everyone 👍

Hi Specky! I know I’m 4 years late to the party, but I just purchased the TW products you reviewed and am going to detail my car for the first time, ever 😬. My question is, can I use a buffer machine to buff off the ceramic spray or does it have to be done by hand? I didn’t see anything about that on the bottle. Also, thanks for sharing your knowledge! I’ve learned sooo much by watching your videos! Take care!

Brand new power washer owner as of about 3 hours ago, so this may not be the smartest question lol but-.. wouldn’t it be potentially worth the effort to “figure out” the correct position of the adjustment screw (and locking down/gluing/marking or whatever) instead of doing a mixture every time? Then you would just put in 100% product and could have the correct end result without having to measure?! I don’t have the real world experience to know if this is feasible, but it will be my first experiment so wish me luck! Lol

One of the best reviews on this product. Very informative and honest. Top marks.

Coat wise you mentioned comments then your neighbour walked out wearing one😂

Coat wise you mentioned comments then your neighbour walked out wearing one😂

By hand is much safer!! Yes practice on someone else's car! 🤣

All bull poopies. You just added to the disinformation. A normal carnauba wax would do the same at half the price!!!!!!!!!!!!!

PLEASE DONT BE FOOLED ABOUT THE WARRANTY ITS BEEN 5 WEEKS IAM TRYING TO SORT OUT WARRANTY CLAIM MY GUN IS NOT WORING YOU ARE TALKING TO A EMAIL ITS NOT WORTH THE PAPER IT WRITTEN ON STICK TO KARCHER AT LEAST YOU TALK TO A HUMAN AND FOR PEOPLE WHO RELAY ON THE WASHER FOR WORK IT SAYS IT WILL TAKE 13-14 DAYS FOR A reply

Super late comment but I’ll comment anyway, my only problem with your pre rinse test is that you put on the pre wash after you let the rinse side dry first. So you’ve basically just done the same test again in a way. No bash just my observation mate.

Take Oxalic acid from the Boatsport.. best cleaner ever

My father has owned quite a few white cars over the years. Always difficult to keep clean anyway. A few years ago, when he got his latest one, I 'cleaned' it using just the pressure washer. Once dried, there was hardly any difference, so I always use a pre cleaner of one brand or another ( I'm not biased towards a specific one) now. Now for a tale. At a company I used to work at, the boss asked the works know all to wash his wife's rather dirty black car. Said know all used only the pressure washer from the maintainance department. When the boss came back, it was still filthy and covered in traffic film! Suffice to say, he wasn't pleased. I volunteered to do it, using the valeting materials I had in my car. Proper job and one satisfied boss, who suggested I should do it for a living, which I later did.

With no electric polisher, used Mcguire's by hand. Takes an awful lot of work to remove even very minor scratches on lacquer with this product but the finish seemed very acceptable.

I washed my car once a year, if it’s lucky.

Whats The best Dilution for Sonax BSD for no streaking with till top performance?

Your channel name is fantastic!

You would be the best science teacher ever!!

I've just been doing your flow rate check, and the bucket was getting close to overflowing with only a fraction of the water in the bottle used. So I measured what remained in the bottle and subtracted that from what I started with - and I had used 304ml. There were 34 litres of water in the bucket. That gives a flow rate of 113litres per litres of product, which seems inordinately high compared to figures in your test. The lance is a Stonebank eBay special. Has anyone else found such a high figure ? The pressure washer I'm using claims 150 bar.

..man I wish Autoglym didn't pull out of Canada... so much nice stuff we didn't get.

At its not always possible to work on a car that's not in direct sun, which is the best pre wash that can be applied in sunlight without harming the paint if it dries on. If the answer is none, then what's the answer?

It amazes me how many of these are not available in the US.

thank you I just do it the slow way 😊

That's a lot of Bilt Hamber, I always read that you didn't need to use much of it, so it was really economical. 1:10 would be a lot smaller amount of product, about 90ml of product compared to 300ml+, that would be about 1:2.

Brilliant! Are you Glasgow based?!

Where have you gone speccy?

Nothing wrong with taking the time and just do it by hand. Allways great result with this product. Never the risk of damage the paint .

Specky how long to you let the wax sit on panel before you wipe off?

Just ordered the p50 from b&q for £189 no bundle but just ordered the foam Canon from ava cos that's all I need, hope to see you back on RUclips soon

Which dryer is this one? Because I’m looking to get one

Wow...there should be a BSc Hons degree in snow foam application 😂

What do you mean by 4% ? Does that mean 4 parts foam to 96 parts water?

Hi Specky, can you use the bodywork conditioner shampoo on a ceramic coated car or is the pure shampoo a better option

Very interesting 👍

Great value little product , ideal to freshen up after a wash ontop of well prepared paint and maybe as a topper

👍👍😊

I agree with the other comments Specky, good to see you back

The only cake i eat is my wifes cake. 😌

good to see you back, and very true my friend, but please say you haven't bought a Nissan Kumquat.......😱

So good to see you back mate

You are right, but it is a kind of marketing for you, that's will help your service to gain more money, It gives the customer the impression that the service provider is professional and uses valuable materials to serve him.

I’ve been using 4 star Ultimate Paint Protection for 20 years. It’s a liquid. You first prep the car with a chemical cleaner of your choice. Then you put the product on the entire vehicle, wait an hour, then dust off. I’ve had it keep beading for at least 6 months.

Car polish is abrasive and should be used with car which is why I'd always do it by hand. I would use machine for more of a restoration job

You don’t even need a buffer with arms that quick 😂

You need 3 snow guns

Simoniz does actually say apply with a clean damp cloth.

Will have to purchase these to help with my valeting will make life easy for cleaning wheels.

Nice1..Specks & thank u

Surfex hd just does it. I use it as "pre wash" and wheel cleaner.

Hi, great video, just wondering if it can be used on pvc windows and doors? Personally I can't see why not, however you've tried and tested various products, so would have more experience to confirm or don't recommend, thank you